Description
This range of Avonsoft water softeners are especially designed for dishwashers having their own integral Type 'AA' air gap. They are configured as single cabinet type softeners, with consideration given to minimal space generally available around dishwashing machines in commercial kitchens. HERE THE SIMILARITY WITH ANY OTHER SINGLE CABINET HOT WATER SOFTENER ENDS. AVONSOFT Single Cabinet Hot Water Softeners are two separate containers within a single cabinet. One housing the softening vessel, the other the salt. This configuration prevents heat transfer that causes salt to encrust the softening vessel and evaporate the regenerating brine solution. They are constructed in hygienic wipe clean grey or white fibreglass Specifications MODELAH6AH10AH15AH20 WIDTH260mm260mm260mm260mm DEPTH460mm460mm460mm460mm HEIGHT660mm800mm700mm700mm PIPE CONNECTIONS3/4" BSPT CAPACITY**1300 litres2600 litres3370 litres4450 litres SALT DOSE0.96kgs1.92kgs2.40kgs3.20kgs MAX.WATER TEMP65°C MIN. WATER PRESSURE1.4 bar (20 p.s.i.) ELECTRICAL SUPPLY230 volts 50Hz 1Ph 3amp **Capacity assumes a water hardness of 20° Clarks (286mg/ltr as CaCO3 These water softeners are suitable for almost all dishwashing machines. In most cases the AH6 would be appropriate for the single tank machines however, in extremely busy kitchens the AH10 would be more suited, the AH15 and the AH20 would be fitted to the rack conveyor machines. To size the softeners with dishwashers, assume 3 litres of water per dishwasher rack, divide the capacity (Soft Water) by 3 to obtain the number of racks available between regenerations. For example the AH6 will softener sufficient water for 3/1300 = 433 racks at 286mg/ltr hardness. If it is unlikely the kitchen daily meals total will exceed this rack total, fit the AH6 otherwise fit the AH10. This is brand new and has never been used. Its still in the original box. Collection from Cardiff or contact me for postage.