Description
for sale FOLDABLE rotary ironing machines from Cordes modell 834 (part of Miele nowadays)
GREAT FOR IRONING OF YOUR BEDDING, TABLE CLOTHS, TOWELS etc
perfect solutions for all professional ironers or B&B, Resturants saving you time and money.
machine is in good technical condition with only cosmetic marks commensurate with age like some spots etc not affecting the work in any way
general features
total power intake - 3080W
heating/ironing power intake - 3000W
rotate/press motors' power 80/80W
Wheels allow you move it to a storage when not needed
fresh cloth fitted
Nationwide delivery - hence the advert here as we're based in Berkshire. See my other machines or just call 0784 975 1815
Dimensions
D 41cm, W 100cm, H 95cm
roll diameter - 15cm, roll length 85cm
weight - about 45+kg
new cloths have been worn on since 1st pictures as you can see on the last photos
heat up time - up to 5 minutes - just choose your temperature (single, double, triple dots as in regular old fashion irons) when thermostats heat the plate enough the there's a "relaxing" intense ticking and light by switch goes off
light moist fabric allowed - YES - works much better with moist cotton or linen clothes but do not use it as a cloths dryer!!!!!
To use it switch it on set the temperature up, and when ready simply press the pedal which moves the heating panel towards the roll and starts rolling it. You can also stop the roll by slight up lift of your foot slightly - just sense it out
Please, know the fabric type. Nowadays cottons are very often mixed with polyesters or other cheap stuff which can melt or at least cripple in the higher temperatures.
ALL EMBROIDERY, PLASTIC BUTTONS, ZIPS, LABELS MUST NOT TOUCH DIRECTLY THE HOT PLATE AS THEY MAY MELT leaving smudges on the plate itself and make your garment permanently dirty. THEY MUST BE THEN FACING DOWN TO THE ROLL Have seen it done so but one of my customers before. He had to scratch it very gently off the plate once the machine cooled down so really - IT IS NOT A TOY BUT A HOT MACHINE WHICH MUST BE KEPT AWAY FROM CHILDREN
Releasing the foot pedal allows you to take out your garment which once ironed ends up on the table under the roll
temperature adjustment depending on the fabric type from curtains, nets, wool, to cottons, linen etc. - see the thermostat picture
Very easy to use. Once you get familiar with it you can iron virtually everything including shirts.
ALL WORKS CARRIED IN A SITTING POSITION so if you spend ages ironing why not to do it sitting...
whilst doing ie children clothes you can put more then 1 piece of garment in a single go - ie 2 pairs of kids shirts, trousers etc.
DUE TO WEIGHT OF THE UNIT COLLECTION IN PERSON PREFERRED but can obviously arrange a delivery anywhere in the UK - it is I think just about 40 kg and a bit awkward in shape for the courier to pack. Therefore unless collected in person or delivered by myself, I can send it on a palette at £75 for a 48 hours delivery nationwide (APC)
If you need a courier feel free to either ask me about that or arrange one at your cost (or add to the total whilst paying via paypal) and we will wrap it securely over for travel for you.
We can also deliver for the cost of petrol :-) We're based in Wokingham, Berkshire
PLEASE NOTE - THIS IS USED BUT FULLY WORKING ITEM WHICH IS SELLER INSPECTED AND SOLD AS SEEN THEREFORE ANY VIEWING / INSPECTION / TEST IS WELCOME PRIOR TO AUCTION END SINCE NO RETURNS OR REFUNDS.
WE PROVIDE 1 WEEK START-UP WARRANTY MEANING THAT WE WILL EITHER MEND IT OR REPLACE WITH ANOTHER UNIT. PHYSICAL DAMAGE CAUSED DURING OWN CARRIAGE CANNOT BE COVERED BY THIS.
for shipping to Ireland, any other British Isles and Scotland specifically north of central belt please contact me prior to purchase due to specific shipping times and cost
any questions ring/voicemail/txt on 0784 975 1815 as more machines are available
payment via paypal / bank transfer or cash on collection only.
happy bidding
Health & safety
This ironer is not a toy!
To avoid the risk of accidents and damage to the ironer please read these instructions carefully before using it for the first time. They contain important information on its safety, use and maintenance.
Keep these instructions in a safe place and ensure that new users are familiar with the content. Pass them on to any future owner.
Correct application
This ironer must only be used for ironing articles which were washed in water and which have a care label stating that the article is suitable for machine ironing.
This ironer is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, unless they are supervised whilst using it or have been shown how to use it correctly by a person responsible for their safety. The seller cannot be liable should any incident happen.
Technical and electrical safety
Before setting up the ironer, check it for any externally visible damage. Under no circumstances should you use it if it has been damaged. A damaged appliance may be dangerous.
If the supply cord is damaged, it must be replaced by an approved service technician to avoid a hazard.
Before connecting the ironer, ensure that the connection data on the data plate (fuse rating, voltage and connected load, min 13A) match the mains electricity supply. If in any doubt, consult a qualified electrician.
The electrical safety of this appliance can only be guaranteed when continuity is complete between it and an effective earthing system which complies with current local and national safety regulations. It is most important that this basic safety requirement is present and regularly tested, and where there is any doubt the household wiring system should be inspected by a qualified electrician. The manufacturer or seller cannot be held liable for damage or injury caused by an inadequate earthing system (e.g. electric shock).
This ironer complies with all relevant local and national safety requirements. Unauthorised repairs could result in unforeseen dangers for the user, for which manufacturer or seller cannot accept liability. Repairs should only be undertaken by an approved service technician.
Ensure device is not supplied to the mains until after maintenance or repair work has been carried out.
Faulty components must only be replaced by genuine original parts. The manufacturer can only guarantee the safety of the appliance when original replacement parts are used.
The ironer is only completely isolated from the electricity supply when:
it is switched off at the wall socket and the plug is withdrawn, or
it is switched off at the mains, or
the screw-out fuse is removed (in the UK and other countries where this is applicable).
Do not damage, remove or bypass the safety features, fixtures and control elements of this ironer.
Any removable outer panels must be in place, and all moving or electrical parts shielded before the ironer is switched on.
This ironer may only be used in mobile installations such as ships if a risk assessment of the installation has been carried out by a suitably qualified engineer.
Correct use
When working with the ironer always wear close fitting clothes. Wide sleeves, apron straps, scarves and ties etc. could be taken in by the roller.
Remove any rings, bracelets, or other jewellery before starting to work. Tie back long hair
When heated up there is an acute risk of burning: if the heating plate is touched,
if the foot pedal is pressed down while fingers or hands are positioned between the raised heater plate and the roller.
To avoid the risk of injury do not let children play on or near it, or with the controls. Supervise children whilst you are using it.
Do not drape laundry over the heater plate when it is heated up. This is a fire hazard.
Use the swing out bar. It is designed for hanging laundry on. After use it should be swung back out of the way. Take care not to press down on the bar when it is swung out. There is a danger that this could tip the ironer over.
Switch the ironer off before removing the plug from the socket.
Do not pull it by the cable.
Do not connect the ironer to the mains electricity supply by a multi-socket unit or an extension lead. These do not guarantee the required safety of the appliance (e.g. danger of overheating)
Do not lay the connection cable over the heater plate when it is heated up. This could damage the cable -danger of electric shock. Use the cable holders on the ironer to wind the cable away.